Tailor's Porcelain Glue C2

Porcelain Tile Fix C2TES1

High quality, Flexible, ready to mix, Walls & Floors tile adhesive.

Description:

Porcelain Tile Fix is ​​cement based high quality, modified polymer, ready mixed, flexible, thin set tile adhesive mortar in powder form.

Porcelain Tile Fix requires the addition of water on site. Porcelain Tile Fix is ​​ideal for fixing floors and wall tiles especially in submerged areas such as swimming pools, water tanks, kitchens, bathrooms, shower rooms and where heavy traffic is present in private and public buildings. Porcelain Tile Fix is ​​suitable for fixing marble, porcelain, ceramic and mosaic tiles, thin bricks up to 50 kg/ m2 weight.

The suitable substrates are concrete, cement base plastered walls and floor screeds, gypsum, cement plaster boards, block walls and light weight blocks. For extreme conditions. Porcelain Tile Fix can also be used for fixing new tiles on old glazed ceramic walls and floors tiles.floors tiles. Suitable for fixing large tiles

Base

High strength hydraulic cement, graded clean calcium carbonate and selected additives

Appearance

White or gray Powder

Aggregate Size

1.0 mm Max

Open Time @ 25°C

Approx 30 minutes.

Adjustability @ 25°C

20-25 Minutes

Pot Life @ 25°C

Approx. 3 Hours

Final Setting @ 25°C

Approx. 6 Hours

Sag Resistance

(EN 1308)

≤ 0.5mm

Compressive Strength@28da

(ASTM C349)

≥ 10 MPA

Flexural Strength@28days

(ASTM C348)

≥ 4 MPA

Bond Strength

@28days (EN 1348)

≥ 1.2 MPA

Mixed Density

Approx. 1.6 kg/lit. ±0.05 Kg

Open to traffic

24 hours

Minimum Application

Temperature

5°C

Transverse Deformation

(EN12002)

S1

Surface Preparation

Cement based walls and screeds should be left to cure for at least 14 days prior to application of Porcelain Tile Fix.

Rough or uneven concrete surfaces should be made flat and smooth. All substrates should be in a good and strong condition. All substrates should also be clean and free from any loose particles, dust, oil, grease, the curing agents, or paint. Tiles to be fixed should be clean and free from any surface contamination. If the surface is dry and in hot weather, pre-wet it prior to the application of Porcelain Tile Fix without leaving excess water.

Application procedures

Application procedures

-The entire contents of the bag should be mixed together with water, in one container using a hand drill equipped with a mixing blade or high shear stationary mixer.

-Partial small amounts may be mixed manually, with a trowel, or other suitable hand mixing tools.

-Add 5.5 - 6.5 liters of fresh, cool, clean water in one deep container. Then, add the contents of the 20 kg bag gradually while mixing till the mixture is uniform and free of lumps. Leave the mixed material for 10 minutes and remix for one minute.

-Porcelain Tile Fix should be applied while the mortar is fresh and workable (within Pot Life).

Apply Porcelain Tile Fix to the prepared surface using the flat side of the trowel while pressing firmly into the prepared substrate.

-Use suitable notched trowel to ensure full bedding of the tile with 2 – 3 mm minimum uniform thickness.

-Spread Porcelain Tile Fix in areas not more than 1.0 m2.

-Press tiles firmly into place and gently adjust the level by twisting slightly within 15 minutes ensuring proper transfer of 85% of the mortar to the back of the tiles.

-Leave tiles to dry for at least 24 hours before starting grouting. Use Tile Grout according to joint width.

Composition

Porcelain Tile Fix is ​​manufactured from carefully selected raw materials which include a blend of special high strength hydraulic binders, selected well graded fillers, and special additives to enhance workability and bonding characteristics.

Standards

Porcelain Tile Fix is ​​formulated to comply with ANSI 118.4 and EN 12004 standards.

SASO EN 12004:2021 (C2TES1)

Mix Proportion

Approx. 5.5-6.5 liters of water/ 20 kg bag.

Coverage

3 – 5 kg/m2

(Coverage rate may vary depending on surface condition, the type of towel used).

Characteristics

-Easy to use and apply. Only requires the addition of water on site for ease of use.

- Raw materials are selected according to the highest quality control standards.

- Excellent mixing and workability characteristics.

- The simplicity of usage and application gives very high productivity rates.

- Exact mixing ratios and homogeneity of the blend, due to the factory fully computerized production process.

- Excellent water and sag resistance.

- Excellent bonding characteristics to plastered substrates and fair face concrete.

-Flexible. Very good resistance to substrate vibrations.

- Long open time and pot life.

Important Notes

- Do not apply Porcelain Tile Fix on movement joints or on dynamic cracked plastered walls. Expansion joints should be included as per the substrate design and carried out through tile applications.

- Using cold water for mixing allows longer pot life and improved workability.

- Use Porcelain Tile Fix White when fixing white or light color stone.

- Porous surfaces such as gypsum plaster boards should be sealed prior to tile installation using Porcelain Tile Fix.

- Do not apply Porcelain Tile Fix on metal surfaces. Use plastic spacers to leave the required joint width around each tile according to pattern and architecture recommendations.

- Leave 2mm minimum joint width around tiles.

Storage

Shelf life is 12 months from manufacturing date, in a dry covered storage area.

Health and Safety

While using the product, gloves and goggles should be worn. Splashes to skin or eyes should be washed with clean water, in case of prolonged irritation, seek medical advice.